LP5 - LPAC Front - LPAAC Back - CBN1- Front Flap
- LP5 setup comprised of LPAC front panel, LPAAC back panel, CBN1 Cummerbund and removable Front Flap
- Removable Front Flap and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert on front bottom
- Color matching VELCRO® Brand Loop Panel on chest
- Back panel includes two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom
- CBN1 Cummerbund - Elastic slick design for lower profile use
- 100% made in the USA
*There is currently a 6-8 week lead time on this product. Every effort will be made to decrease this lead time. Thank you for your continued understanding and support.
The LP5 setup is comprised of the front panel of the Low-Profile Armor Carrier (LPAC) the back panel of the Low-Profile Assault Armor Carrier (LPAAC), the Low-Profile Elastic Cummerbund (CBN1) and a removable Front Flap. The LP5 is made of 500 Denier Cordura with a mesh interior and comes with our standard shoulder pads that are made of a stretch woven material, allowing enough elasticity to permit room for cable/hydration tube routing. The LPAC and LPAAC are designed to provide the wearer with a high degree of mobility while providing an acceptable amount of soft armor coverage, or both soft and hard armor coverage. The hard armor plates are contained in pockets attached to the outside of the soft armor carrier allowing the soft armor to mold to the wearers body for long duration mission comfort. The front and rear hard armor plate pockets have adjustable internal plate suspension straps and a VELCRO® Brand flap closer to secure the plates.
The LP5 is available in four sizes; S, M, L and XL. The size small hard armor plate pockets hold small SAPI shape plates ONLY. The size medium, large, and x-large hard armor plate pockets hold 10"x12" Shooters/Swimmers cut plates or SAPI shape plates of corresponding sizes to the carrier. The soft armor inserts intended for this carrier are the Velocity Systems LPAC/LPAAC Cut Soft Armor. This is a custom cut of soft armor designed for this carrier. Other manufacturers' soft armor may not fit correctly, contact us to inquire about fitting if using other soft armor. All hook and loop material used is color matching VELCRO® Brand Fasteners. All materials and workmanship are 100% made in the USA.
The Low-Profile Armor Carrier (LPAC) front panel has a removable front flap with three rows of MOLLE webbing and an integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert. The chest has a color matching Loop Panel and Velocity Systems SwiftClip® Attachment System for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs & SwiftClip® Placards).
The Low-Profile Assault Armor Carrier (LPAAC) back panel has two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom.
This setup includes the Low-Profile Elastic Cummerbund (CBN1) which provides an elastic slick design for lower profile use.
*The follow is not included in this setup: Low-Profile Armor Carrier (LPAC) Back Panel / Low-Profile Assault Armor Carrier (LPAAC), Front Panel / Standard Molle, Plate Pocket Cummerbund (CBN3). *The Standard Molle, Plate Pocket Cummerbund (CBN3) can be purchased from our website as an additional accessory.
International ECOM returns/refunds×
International Customers: Velocity Systems does not accept returns or offer refunds unless the product is defective. For international orders, the customer is responsible for all landing cost (landing costs includes: applicable duties, taxes, and fees). If the customer elects not to pay the landing fees and/or accept the package, Velocity Systems is not liable for the landing cost, package return fees, or product refund.