SC8 - SCARAB™ LE Front - SCARAB™ LT Back - CBN1 - Quarter Flap
- SC8 setup comprised of SCARAB™ LE front panel, SCARAB™ LT back panel, CBN1 Cummerbund and Quarter Flaps
- Three rows of loop MOLLE webbing and integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert
- Admin pouch with two external rows of MOLLE webbing on chest
- Back panel includes six rows of MOLLE webbing, loop on upper rear for ID and accepts Zip-On Back Panel
- CBN1 Cummerbund - Elastic slick design for lower profile use
- Quarter Flaps - house soft or hard armor and allow user to dawn/doff from single point without having to lift front flap
- Holds hard armor plates up to (1") one inch thick
- 100% Made in the USA
*There is currently a 4-6 week lead time on this product. Every effort will be made to decrease this lead time. Thank you for your continued understanding and support.
The SC8 setup is comprised of the front panel of the SCARAB™ LE, the back panel of the SCARAB™ LT, the Low-Profile Elastic Cummerbund (CBN1) and Quarter Flaps. The SC8 is made of 500 Denier Cordura with a mesh interior lining for increased breathability and features the Velocity System patented swivel shoulder straps (US Patent No. 9,894,962). The swivel shoulder straps were designed to alleviate common fit issues with traditional fixed angle shoulder straps. The narrow ULTRAcomp™ shoulder straps articulate on a D-ring allowing them to sit correctly and comfortably on any user regardless of neck thickness or shoulder broadness. The ULTRAcomp™ Shoulder Straps are adjustable for length and have a padded sleeve, that can also be used for cable routing.
Four sizes are available for the SC8; S, M, L and XL. The SCARAB™ LT/LE is sized to hold SAPI plates of corresponding sizes to the carrier. The front and rear plate pockets have adjustable internal plate suspension straps and a Velcro® Brand fastener on a flap closer to secure the plates. The SCARAB™ LT/LE Cummerbund options all have Velcro® Brand One-Wrap® fingers that slide inside the button holes on the rear of the SCARAB™ carrier and affix to the interior wall of the plate pocket. 1” of Multi-Layer Elastic is built into each cummerbund finger to give some stretch. Each finger can independently be let in or out of the plate bag to accommodate different body figures, and they can be angled for correct armor placement. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
The bottom of the SCARAB™ LE front panel has three rows of loop MOLLE webbing and an integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert. The chest has an admin pouch with two external rows of MOLLE webbing and Velocity Systems SwiftClip® Attachment System for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs & SwiftClip® Placards).
The SCARAB™ LT back panel features six rows of MOLLE webbing and color matching Velcro® Brand Loop on the top for Identification. The back panel of the SCARAB™ LT is outlined in a zipper to accept Zip-On Back Panels.
This setup includes the Low-Profile Elastic Cummerbund (CBN1) which provides an elastic slick design and Quarter Flaps. The Quarter Flaps house both soft or hard armor and allow the end user to dawn/doff from that single point without having to lift the front flap.
*The follow is not included in this setup: SCARAB™ LE Back Panel / SCARAB™ LT Front Panel / SCARAB™ LT/LE Cummerbund / SCARAB™ Light MOLLE, Plate Pocket Cummerbund (CBN6) / Removable Front Flap. *The SCARAB™ LT/LE Cummerbund, SCARAB™ Light MOLLE, Plate Pocket Cummerbund (CBN6) and Removable Front Flap can be purchased from our website as additional accessories.
International ECOM returns/refunds×
International Customers: Velocity Systems does not accept returns or offer refunds unless the product is defective. For international orders, the customer is responsible for all landing cost (landing costs includes: applicable duties, taxes, and fees). If the customer elects not to pay the landing fees and/or accept the package, Velocity Systems is not liable for the landing cost, package return fees, or product refund.