LP4 - LPAC Front - LPAAC Back - CBN1
- LP4 setup comprised of LPAC front panel, LPAAC back panel, and CBN1 Cummerbund
- Integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert on front bottom
- Color matching Velcro® Brand Loop Panel on chest on chest
- Back panel includes two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom
- CBN1 Cummerbund - Elastic slick design for lower profile use
- 100% made in the USA
The LP4 setup is comprised of the front panel of the Low-Profile Armor Carrier (LPAC) the back panel of the Low-Profile Assault Armor Carrier (LPAAC), and the Low-Profile Elastic Cummerbund (CBN1). The LP4 is made of 500 Denier Cordura with a mesh interior and comes with our standard shoulder pads that are made of a stretch woven material, allowing enough elasticity to permit room for cable/hydration tube routing. The LPAC and LPAAC are designed to provide the wearer with a high degree of mobility while providing an acceptable amount of soft armor coverage, or both soft and hard armor coverage. The hard armor plates are contained in pockets attached to the outside of the soft armor carrier allowing the soft armor to mold to the wearers body for long duration mission comfort. The front and rear hard armor plate pockets have adjustable internal plate suspension straps and a Velcro® Brand flap closer to secure the plates.
The LP4 is available in four sizes; S, M, L and XL. The size small hard armor plate pockets hold small SAPI shape plates ONLY. The size medium, large, and x-large hard armor plate pockets hold 10"x12" Shooters/Swimmers cut plates or SAPI shape plates of corresponding sizes to the carrier. The soft armor inserts intended for this carrier are the Velocity Systems LPAC/LPAAC Cut Soft Armor. This is a custom cut of soft armor designed for this carrier. Other manufacturers' soft armor may not fit correctly, contact us to inquire about fitting if using other soft armor. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
The Low-Profile Armor Carrier (LPAC) front panel has an integrated flat kangaroo pouch sized to hold our Double HK417, Double 7.62, and Triple 5.56 Magazine Insert. The chest has a color matching Velcro® Brand Loop Panel and Velocity Systems SwiftClip® Attachment System for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs & SwiftClip® Placards).
The Low-Profile Assault Armor Carrier (LPAAC) back panel has two rows of loop MOLLE webbing and a drag handle at the top and four rows of MOLLE webbing at the bottom.
This setup includes the Low-Profile Elastic Cummerbund (CBN1) which provides an elastic slick design for lower profile use.
*The follow is not included in this setup: Low-Profile Armor Carrier (LPAC) Back Panel / Low-Profile Assault Armor Carrier (LPAAC), Front Panel / Standard Molle, Plate Pocket Cummerbund (CBN3)/Front Flap. *The Standard Molle, Plate Pocket Cummerbund (CBN3) and Front Flap can be purchased from our website as additional accessories.