Allows auxiliary equipment to swiftly clip on or off your base component Accept any items with an ITW 1" male side release buckle 100% Made in the USA *There is currently a 4-6 week lead time on this product. Every effort will be made to...
Holds a CAT tourniquet Simple but durable shock cord retainer Weighs 0.2 oz. (6 grams) 100% Made in the USA *There is currently a 4-6 week lead time on this product. Every effort will be made to decrease this lead time. Thank you for your...
Allows auxiliary equipment to swiftly clip on or off your base component Accept any items with an ITW 1" male side release buckle 100% Made in the USA *There is currently a 4-6 week lead time on this product. Every effort will be made to...
Carries 4ea 5.56mm mags, 2 pistol mags, up to 2 small radios Two GP pockets Loops to route antennas, wires and hydration bladder tubing Four one inch ITW-Nexus side release buckles Designed to mount to front of Low-Profile Armor Carrier Comes with our Standard...
Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962) Narrow ULTRAcomp™ Shoulder Straps 100% Made in the USA Sized to hold plate of corresponding carrier size, example size large carrier holds size large ESAPI Plates Three (3) Cummerbund Options: SCARAB™ LT/LE Cummerbund,...
Sleek and clean look Mesh lining Quarter flaps and placards sold separately S/M LEPC fits size Small, Medium and 10"x12" sized plates up to 1" thick and below L/XL LEPC fits Large and X-Large plates up to 1" thick and below Holds SAPI, Shooter, and...
A scree collar Helium Whisper attachment system (zero water absorbance) Large diameter drain holes Top mounted d-rings ¾ ” ITW Fastex fasteners Loop fastener for visual identification aids Webbing straps for attaching equipment externally Webbing on the sides for attaching additional PALs/Molle pouches Each Jungle...
Stretch woven material Comfortable low profile design Elasticity to permit room for cable/hydration tube routing 3 Padded Shoulder Sleeves size options: VELCRO® Brand closure 2” Fits 1 ½” & 2”, Standard 1 ½” Shoulder, Standard 2” Shoulder 100% Made in the USA *There is...
Stable platform to suspend and distribute the weight of the loaded down jungle belt kit Main shoulder piece is made of ULTRAComp material Removable padding which doubles as routing for hydration tubes and communication wires Six adjustable points of attachment to the belt kit Loop fastener...
Patented swivel shoulder straps with D-ring attachments (US Patent No. 9,894,962) Front flat kangaroo pouch and removable front flap Admin pouch with two rows of MOLLE webbing on front chest Integrated SwiftClip® buckles for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs &...
Low-profile, lightweight general-purpose H-Harness Made of ULTRAcomp material Material does not absorb water 1” elastic provided on straps for hydration bladder tubing routing, PTT attachment, commo wiring and antennas 1” ITW QASM buckles mounted on the front provide 3” of vertical adjustability Loop panel provided...
Sold as a single pouch Two internal flat pockets Draw cord scree collar Helium Whisper attachment system (zero water absorbance) Large diameter drain hole A top mounted looploc A combination ¾ ” ITW Fastex fastener and Velcro closure Webbing on the sides for attaching...
Sold as a single pouch ULTRAComp front pieces for abrasion resistance on the corners of the magazines Helium Whisper attachment system (zero water absorbance) Large diameter drain hole A top mounted d-ring A combination ¾” ITW Fastex fastener and VELCRO® Brand closure Webbing on the...
Used to identify friendly forces, personnel, and equipment Can attach to vehicles, rucksacks, hand held or laid out on the ground Equipped with tie down loops High-visibility fluorescent orange & cerise Lightweight, water and abrasion resistant VS 17 Panel is made of 200 Denier pack...
MultiCam and MultiCam Black Velocity Systems Hats
Limited Run
100% of the proceeds made from the hat sales will be donated to the Special Operations Care Fund (SOC-F)
Snapback
Adjustable Fit
Load carriage solution for the hot, wet jungle environment Helium Whisper attachment system (zero water absorbency) H-harness featuring removable padding and sternum strap Pouches options are designed around the amount and type of equipment usually needed for long duration jungle patrolling 100% Made in...
Sold as a single pouch ULTRAComp front pieces for abrasion resistance on the front of the canteen Helium Whisper attachment system (zero water absorbance) Large diameter drain hole Atop mounted d-ring A combination 1” ITW Fastex fastener and VELCRO® Brand closure (can be silenced) Webbing on...
Offered as replacement piece for a misplaced wait belt or an alternate size is required Single piece of 1” webbing Small Waist Belt Dimensions: Adjusted to Longest Dimensions 23½" Adjusted to Shortest Dimensions 15" Large Waist Belt Dimensions: Adjusted to Longest Dimensions 35½ "...
Designed for the individual that does not want to or like to wear a padded belt Can be used in our Operator Utility Belt or standalone 2” webbing sewn at 1.5” intervals to keep PALs/Molle pouches from sliding out of position ITW Fastex dual adjusting side...
Take on extended missions with confidence using the 48-Hour Assault Pack from Velocity Systems. Featuring three storage pockets, a water bladder pocket, and internal organization options, this pack ensures you are ready for any situation. The durable construction and ITW-Nexus IR buckles make it...
Fills gap between short duration 24HR Assault Pack and full-size rucksack Internal frame sheet Ergonomically shaped aluminum wire frame Top loading, PALS panels on the sides Top pocket with small electronics pocket and two daisy chains Two hip climbing gear attachment loops Two top...
Holds a Motorola SABER Radio or similar sized radio VELCRO® Brand fastener panel insert directly into the front flap of a plate carrier (between the front flap and cummerbund) or into the side envelop pocket of the Mission Configurable Chest Rig (MCCR) or Mission...